Features:
* The backup camera screen kit can provide you with a clear rear view for your driving
* Full color TFT LCD display, Low power consumption
* Parking rearview priority, The monitor will start up automatically, and synchronously display the video from rearview camera when you're backing your car
* The monitor will close itself after backing. Scenes will cut to rearview camera automatically while you're backing the car and change back to the original scenes after that
* Supports Car Camera, DVD, VCD, STB, Satellite receiver, and other video equipments
* With 2 road video input port, white video cable connects to car rearview camera, the yellow one connects to DVD or VCD, White video cable is priority signal input, when 2 road has signal input, the machine will prioritize the white end signal
* No Audio input or output
Transmitter and receiver:
* Take one minute get your camera become a wireless camera
* Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit
* Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end
* The transmitter also includes a handy pass through for the power so you can connect it inline with your camera
* Wireless transmitter with male phono plug and male 3.5mm power plug for supplying power to the camera
* Wireless receiver with male phono plug for connection to monitor
* Connects to rear-view camera and front video screen
* Fit all RCA composite video connections
Review Camera:
* Professional exterior waterproof car rear view camera
* Small compact size
* Low power consumption
* Low maintenance
* Easy to install and operate
* Perfectly solve the issue of bad car rear view effect
Specifications:
* Screen Dimension: 4.3 inch
* Resolution: 720*272
* Standard: PAL/NTSC
* Video in: AV1/AV2
* Aspect Ratio: 4:3
* Power Supply: DC 12V
* Brightness: 300 nits
* Contrast: 250:1
* Housing Material: ABS
Transmitter and receiver:
* Work Range: Up to about 10m(Hollowness)
* Power: DC 12V
* Transmitter/Receiver Cable Length:1.4m
Review Camera:
* Sensor: PC7080 1/3 Inch Color CMOS
* TV system: NTSC
* Effective pixels: 628 X 582 pixels
* Scanning System: 2:1 Interlace
* Sync System: Internal
* Resolution: 420 TV lines
* Lens Angle: 2.8mm/120°- 1.8mm/170°
* Sensor Area: 5.961mm x 4.276mm
* Video Output: 1.0 VP-P,75 OHM
* S/N Ratio: More than 48db
* Water-proof
* Minimum 111umination: 0.2Lux/F1.8(0Lux with LED)
* Power supply: DC 12V
How to use it:
1. Take out your stock license plate light at the back of your car
2. Fix the camera to where the stock license plate light was
3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
4. Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and plug for power
5. Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and wire for negative
6. Connect the wireless module (receiver) to your car monitor - yellow plug for AV input
7. Connect the wireless module (receiver) to your car battery to get the power - red wire for positive and wire for negative
8. You will see the images when your car is in reverse shift
Package contents:
1* 4.3 Inch Monitor
1* Power cable
1* 2.4G Wireless Audio Video AV Transmitter
1* 2.4G Wireless Audio Video AV Receiver
1* Car Rear View Camera
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness